Ranger 2WD V6-3.0L (2008)
10. Install the transmission fluid filter.
1
Position the transmission fluid filter on the main control valve body.
2
Install the transmission fluid filter screw.
^
Tighten to 10 Nm (89 lb-inch).
11. Position the oil pan magnet in the transmission fluid pan.
12. NOTE: The transmission fluid pan gasket is reusable. Clean and inspect for damage, if not damaged, the gasket should be reused.
Install the transmission fluid pan.
1
Position the transmission fluid pan gasket on the transmission fluid pan.
2
Install and align the transmission fluid pan.