Ranger 2WD V6-3.0L (2008)
![background image](/ford/ranger_2wd/v6-3.0l/Page-1233004.png)
8. Index-mark the pinion flange in relation to the pinion stem to make sure of correct alignment during installation.
9. Using the special tool, remove the pinion flange.
Installation
1. Lubricate the pinion flange splines with lubricant.
2. NOTE: Disregard the scribe marks if a new pinion flange is being installed.
Align the pinion flange with the drive pinion shaft.
3. Install the pinion flange using the special tool.