Ranger 2WD V6-3.0L (2008)
![background image](/ford/ranger_2wd/v6-3.0l/Page-1237002.png)
Installation
1. Lubricate the lips of the new rear axle drive pinion seal with grease.
2. NOTE: If the rear axle drive pinion seal becomes misaligned during installation, remove the rear axle drive pinion seal and install a new seal.
Using the special tool, install the rear axle drive pinion seal.
3. Install the pinion flange.
Ford 8.8-Inch Ring Gear - Rear Drive Axle/Differential
Drive Pinion Seal