Ranger 2WD V6-3.0L (2008)
7. NOTE: The differential housing cover must be installed within 15 minutes of application of the silicone, or new sealant must be applied. If
possible, allow one hour before filling with lubricant to make sure the silicone sealant has correctly cured.
Install the differential housing cover and 10 bolts.
^
Tighten to 45 Nm (33 lb-ft).
8. NOTE: Service refill capacities are determined by filling the axle with the specified lubricant to the specified level below the bottom of the filler
hole.
Remove the plug and fill the axle to the level shown with axle lubricant and install the filler plug.
^
Tighten to 52 Nm (38 lb-ft).
9. Install the tire and wheel.