Ranger 2WD V6-3.0L VIN U (1998)
1. Compress the parking brake cable spring and attach the parking brake lever.
2. Clean and lubricate the brake backing plate.
-
Use Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (Motorcraft WA-10) or an equivalent silicone compound
meeting Ford specification ESE-M1C171-A.
3. Attach the parking brake lever to the rear brake shoe and lining and secure the parking brake lever pin retainer.
4. Install the rear brake shoes and linings.
1
Position the rear brake shoes and linings.
2
Install the brake shoe hold-down spring pins and the brake shoe hold-down springs.
