Ranger 2WD V6-3.0L VIN U (1998)
Cruise Control Servo Cable: Adjustments
1. Remove the actuator cable clip.
2. Adjust the actuator cable.
1
Pull on the actuator cable to remove any slack.
2
Back off the actuator cable one notch.
NOTE:
^
For proper operation the actuator cable must not be pulled taut.
^
The throttle body cam will automatically spring set to the closed position. The throttle body cam must be in the closed position.
3. Install the actuator cable clip.
1
Hold the speed control actuator cable.
2
Insert the actuator clip securely.