Ranger 2WD V6-3.0L VIN U (1998)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the air cleaner outlet tube.
3. Remove the fan blade and the fan shroud.
4. Remove the drive belt.
5. Remove the crankshaft pulley.
6. Remove the bolt and the washer.
7. Using a Crankshaft Vibration Damper Remover, remove the crankshaft damper.
8. Remove the crankshaft key, if required.