Ranger 2WD V6-3.0L VIN U (1998)
Intake Manifold: Service and Repair
Upper Intake Manifold
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the air cleaner outlet tube.
3. Disconnect the accelerator cable and the speed control actuator cable.
4. Disconnect the engine control sensor wiring from the Throttle Position sensor (TP sensor), the Idle Air Control valve (IAC valve) and the EGR
transducer.
5. Remove the two bolts.
6. Disconnect the vacuum tube.
7. Disconnect the EGR solenoid vacuum tube.