Ranger 2WD V6-3.0L VIN U (1998)
REMOVAL
1. Remove the A/C compressor.
2. Remove the A/C clutch hub retaining bolt.
1
Hold the A/C clutch hub with the Spanner Wrench.
2
Remove the bolt.
3. Remove the A/C clutch and the A/C clutch hub spacer.
1
Thread an 8 x 1.25 mm bolt into the A/C clutch to force it from the compressor shaft.
2
Lift the A/C clutch and the A/C clutch hub spacer from the compressor shaft.
4. Remove the pulley snap ring.
5. Remove the A/C clutch pulley.