Ranger 2WD V6-3.0L VIN U (1998)
Evaporator Core: Service and Repair
Air Conditioning Evaporator
REMOVAL
CAUTION: To prevent system contamination, whenever the A/C evaporator core is replaced, also replace the suction accumulator/drier.
NOTE: If an A/C evaporator core leak is suspected, the A/C evaporator core must be leak tested before it is removed from the vehicle.
1. Remove the suction accumulator/drier.
2. Remove the screws and reposition the A/C vacuum reservoir tank and bracket (if equipped).
3. Disconnect the connector from the speed control servo (if equipped).
4. Remove the bolt and reposition the speed control servo (if equipped).
5. Disconnect the condenser to evaporator tube from the A/C evaporator core.