Ranger 2WD V6-3.0L VIN U (1998)
Fuel Tank Pressure Sensor: Service and Repair
REMOVAL
1. Remove the fuel tank.
2. Remove the fuel tank pressure sensor.
1
Disconnect the electrical connector.
2
Press down and rotate the fuel tank pressure sensor counterclockwise and remove it from the fuel tank.
CAUTION: The fuel tank pressure sensor must be disengaged from the fuel tank before it can be removed. Failure to do so can cause damage to
the fuel tank pressure sensor or the fuel tank.
INSTALLATION
1. Follow the removal procedure in reverse order.
2. Perform the Leak Test.
3. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle Test.
