Ranger 2WD V6-3.0L VIN U (1998)
5. Install the two nuts and bolt.
6. Connect the wire harness to the canister vent retainer.
7. Connect the wire harness connector to the canister vent solenoid valve.
8. Connect the vapor hose.
9. Replace the spare tire.
10. Perform the leak test. See: Testing and Inspection/Component Tests and General Diagnostics/Component Tests/EVAP System Leak Test
11. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle. See: Testing and Inspection/Component Tests and
General Diagnostics/EVAP Running Loss System Repair Verification
