Ranger 2WD V6-3.0L VIN U (1998)
4. Install the transmission case (16 pin) electrical connector retaining spring.
CAUTION: Do not overstretch the retaining spring.
5. Install the Electronic Pressure Control (EPC) and SSB/SS2 solenoids.
6. Install the solenoid clamp.
1. Position the solenoid clamp on the main control valve body.
2. Install the solenoid clamp screws.
CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
