Ranger 2WD V6-3.0L VIN U (1998)
Air Bag: Description and Operation
Passenger Air Bag Module
The passenger air bag module:
^
is replaced as an assembly.
^
is mounted in the RH side of the instrument panel.
Deployment Door
The deployment door:
^
is textured and painted to match the surface of the instrument panel.
^
has a tear seam that separates when the air bag inflates, and hinges out of the way during deployment.
^
retains the air bag in the reaction housing until deployment.
^
must not be repainted for any reason.
^
is a component of the passenger air bag module and is not replaced separately.
Air Bag
The air bag:
^
is constructed of nylon.
^
is a component of the passenger air bag module and is not replaced separately.
Inflator
The inflator:
^
receives electrical energy when the air bag sensor closes.
^
contains an igniter that converts the electrical signal to thermal energy (heat), causing the ignition of the inflator gas generant.
^
inflates the air bag with nitrogen after the chemical reaction takes place.
^
is a component of the passenger air bag module and is not replaced separately.
Reaction Housing
