Ranger 2WD V6-3.0L VIN U (1998)
NOTE: The end of the coil spring must cover the first hole and should not be visible in the second hole.
2. Install the lower ball joint.
(1) Position the front wheel spindle to the lower ball joint.
(2) Install the castellated nut.
(3) Install a new cotter pin.
CAUTION: Always install the cotter pin into the lower ball joint castellated nut from outboard to inboard. Failure to do so will result in damage
to the wheel and tire assembly.
3. Install the front stabilizer bar link nut.
4. Remove the Coil Spring Compressor.
5. Install the front shock absorber and the two lower nuts.
6. Install the upper shock absorber bushing and nut/washer assembly.