Ranger 2WD V6-3.0L VIN U (1998)
8. Using Servo Cover Compressor, remove the intermediate band servo cover retaining ring.
1. Install the Servo Cover Compressor and compress the intermediate band servo cover.
2. Remove the intermediate servo cover retaining ring.
-
Slowly remove tension on the J hook nut and remove the servo cover compressor.
CAUTION: Servo cover is under spring tension. Use caution when removing.
9. Use Servo Rod Removal Tool to remove the intermediate band servo cover, intermediate band servo piston and servo piston spring.
-
Insert Servo Removal Tool into the transmission case, and remove servo cover, intermediate band servo piston and servo piston spring.
CAUTION: Servo removal tool should be used to prevent damage to the servo, servo cover and bore.
INSTALLATION
1. Assemble the intermediate band servo cover, intermediate band servo piston, and the servo piston spring.
1. Install the intermediate band servo piston into the intermediate band servo cover.
2. Install the servo piston spring on the intermediate band servo piston.
2. Install the intermediate band servo piston assembly into the transmission case.
