Ranger 2WD V6-3.0L VIN U (1998)
7. When installing friction plates, the word "TOP" should face up. If reusing plates, grooves must be installed counterclockwise. Install the direct
clutch disc pack.
CAUTION:
-
The forward clutch friction plates are directional and must be installed with grooves pointing counterclockwise (I.D. to O.D.) and the word
"TOP" facing up.
-
If new plates are used, they should be soaked in clean transmission fluid for at least 30 minutes before assembly.
8. Install the five steel clutch plates and five friction clutch plates in alternating order starting with a steel clutch plate.
9. Install the forward clutch pressure plate and the original selective retaining ring.
1. Install the forward clutch pressure plate.
2. Install the forward clutch retaining ring.
CAUTION: The retaining ring is a select fit.
