Ranger 2WD V6-3.0L VIN U (1998)
6. Clean and inspect the transmission fluid pan and magnet. Clean all mating surfaces.
7. Flush the transmission fluid cooler and transmission fluid cooler lines.
INSTALLATION
1. Lube and install new O-rings onto the transmission fluid filter. Install a new transmission fluid filter.
-
Position transmission fluid filter on the main control valve body.
CAUTION: Lubricate fluid filter O-rings with Mercon V or they may be damaged.
2. Install the screw
CAUTION: Make sure wire harness is not pinched under filter.
3. Position the oil pan magnet in the transmission fluid pan.