Ranger 2WD V6-3.0L VIN U (1998)
-
Replace the PCM. For proper removal and installation procedures, refer to your appropriate Ranger Workshop Manual. Refer to chart for proper
PCM usage.
4.
Road test vehicle to verify repair.
Technical Service Bulletin # 00-15-1
Date: 000724
Transmission, Extension Housing - Vibration/Leak
Article No.
00-15-1
07/24/00
^
VIBRATION - VIBRATION FELT AT HIGH SPEEDS -
TRANSMISSION OUTPUT SHAFT BUSHING
DAMAGED OR OUT OF POSITION - 3.0L ENGINE
4X2 MODELS WITH MANUAL OR AUTOMATIC TRANSMISSION
^
TRANSMISSION - TRANSMISSION OUTPUT SHAFT
BUSHING DAMAGED OR OUT OF POSITION - 3.0L
ENGINE 4X2 MODELS WITH MANUAL OR
AUTOMATIC TRANSMISSION
FORD:
1998-2000 RANGER
ISSUE
There may be a vibration at high speeds which may cause the transmission extension housing seal to leak or the transmission extension housing bushing
to move out of position or become damaged on some vehicles. This.may be caused by the calibration in the Powertrain Control Module (PCM).