Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
7. Using a Crankshaft Vibration Damper Remover, remove the crankshaft damper.
8. Remove the crankshaft key, if necessary.
Installation
1. NOTE: Apply a drop of silicone gasket and sealant, securing crankshaft key in position.
If removed, install the crankshaft key.
2. Using a Crankshaft Vibration Damper Installer, install the crankshaft damper.
-
Coat the sealing surfaces of the crankshaft damper with clean engine oil.
-
Coat the crankshaft damper keyway with silicone gasket and sealant.
-
Install the crankshaft damper.