Ranger 2WD V6-3.0L VIN V Flex Fuel (2001)
![background image](/ford/ranger_2wd/v6-3.0l_vin_v_flex_fuel/Page-902001.png)
Engine Mount: Service and Repair
Engine Mount
LH
Engine Support Insulator-LH
Special Tool(s)
Removal
1. Disconnect the battery ground cable.
2. Remove the hood.
3. Remove the fan.
4. Attach the Lifting Eyes.
5. Remove the engine support insulator nuts.
6. Raise the engine and support with a Three-Bar Engine Support.
7. Raise and support the vehicle.
8. Remove the engine support insulator nut.
9. Remove the engine support insulator.
Installation