Ranger 2WD V6-4.0L (2010)
7. NOTE: LH side shown, RH side similar.
Position the air deflectors aside.
1. Remove the 2 pushpins.
2. Position the air deflectors aside.
8. NOTE: LH side shown, RH side similar.
Remove the 2 radiator-to-radiator grille opening panel reinforcement bolts.
9. NOTE: LH side shown, RH side similar.
From beneath the vehicle, remove the air deflector.
-
Remove the 4 pushpins.
10. NOTE: LH side shown, RH side similar.
Remove the radiator grille opening panel reinforcement-to-front fender bolts.
-
To install, tighten to 12 Nm (106 lb-in).
11. Remove the grille opening panel reinforcement.
-
Pull straight outward.