Ranger 2WD V6-4.0L (2010)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Ring - Rear
Wheel Speed Sensor Ring - Rear
Removal
1. Remove the rear axle shaft. For additional information, refer to Differential Assembly &/or Axle Shaft Assembly or Differential Assembly &/or
Axle Shaft Assembly.
2. Using the Pinion Bearing Cone Remover, remove the anti-lock brake sensor indicator from the axle shaft.
Installation
1. Using the Axle Bearing/Seal Plate and the Wheel Speed Sensor Ring Installer, align the rear anti-lock brake sensor indicator to the rear axle shaft.