Ranger 2WD V6-4.0L (2010)
2. With the help of an assistant, release the parking brake cable tension by pulling down on the intermediate cable at the cable-to-cable connector clip
until the parking brake control sector rotates to its stop and insert a fabricated 4 mm (0.15 in.) x 150 mm (5.9 in.) retainer pin. See Figure 1.
3. Remove the right rear wheel and tire assembly
4. Remove the right rear brake disc For additional information refer to the WSM Section 20604
5. Remove the right rear parking brake adjuster spring and the parking brake adjuster. See Figure 2.
