Ranger 2WD V6-4.0L (2010)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Pulley
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the fan shroud. For additional information, refer to Cooling System &/or Engine Block Heater.
3. Remove the accessory drive belt. For additional information, refer to Drive Belts, Mounts, Brackets and Accessories.
4. NOTE: This bolt is torque-to-yield and cannot be reused.
Using the Strap Wrench to hold the crankshaft pulley, remove the bolt and washer.