Ranger 2WD V6-4.0L (2010)
-
To install, tighten to 8 Nm (71 lb-in).
7. Disconnect the suction accumulator outlet fitting.
-
Discard the O-ring seals.
8. Loosen the A/C compressor manifold bolt and detach compressor manifold and tube assembly.
-
Discard the O-ring seals.
-
To install, tighten to 20 Nm (177 lb-in).
9. Remove the compressor manifold and tube assembly bracket nut.
10. Remove the compressor manifold and tube assembly.
11. To install, reverse the removal procedure.
-
Install new O-ring seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
12. Evacuate, leak test and charge the refrigerant system.