Ranger 2WD V6-4.0L (2010)
5. Fill the transmission.
-
Add 3.7L (4 qt) of automatic transmission fluid to the transmission through the transmission fluid filler tube.
6. Start the engine. Move the selector lever through all the gear ranges, checking for engagements.
7. Fill the transmission to the correct level.
1. Using the scan tool, start and run the engine until the transmission is at normal operating temperature 66-77°C (150-170°F), check and adjust
the transmission fluid level, and check for any leaks. If transmission fluid is needed, add fluid in increments of 0.24L (0.5 pt) until the correct
level is achieved (fluid should be in the cross-hatched area of the fluid level indicator).
