Ranger 4WD L4-140 2.3L VIN A EFI (1997)
Head Rest: Service and Repair
REMOVAL
1. Raise front seat back head restraint to maximum height stop.
2. With finger, depress the seat upholstery fabric around the sleeve to locate the hairclip under guide sleeve flange.
3. With finger or suitable tool, pull rearmost leg of hairclip rearward while lifting straight up on front seat back head restraint. This will disengage the
last notch on the front seat head restraint guide rod sleeve.
NOTE: Guide sleeve may be oriented 180° from illustrated guide sleeve. Pull only on the rearmost leg of hairclip, which is the one engaging the
height adjustment notches.
4. Repeat for other front seat head restraint guide rod sleeve.
5. Lift front seat back head restraint to remove.
INSTALLATION
For installation, follow removal procedures in reverse order.