Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
6. From behind the front safety belt guide cover, release the retaining tab and open the cover.
NOTE:
^
If the safety belt guide cover is damaged or if it does not remain closed, install a new cover.
^
Safety belt guide cover shown removed for clarity.
7. Remove the nut and safety belt guide.
8. Remove the safety belt anchor.
1
Use Safety Belt Bolt Bit to remove the bolt.
2
Remove the safety belt anchor.
9. If equipped with moveable quarter window glass, remove the two screws attaching the quarter window latch.
NOTE: The quarter window glass must be open to carry out this step.