Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
Brake Pedal Assy: Service and Repair
Brake Pedal - Automatic Transaxle
Pedal and Bracket - Automatic Transmission
Removal and Installation
1. NOTE: When removing the stoplight switch, retain the bushing and hairpin clip. They will be required for installation.
Disconnect the brake booster push rod.
1
Remove the hairpin clip.
2
Separate the stoplight switch and the brake booster push rod from the brake pedal pin.
3
Remove the brake booster push rod bushing.
2. Remove the bulkhead sound insulator.
