Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
2. Connect the parking brake cable to the parking brake lever.
3. Clip the parking brake rear cable and conduit to the brake line clip on top of the rear axle housing.
4. Install the RH parking brake rear cable and conduit to the RH hydraulic brake line clips.
5. Connect the RH parking brake rear cable and conduit to the parking brake cable bracket.
1
Install the RH parking brake rear cable and conduit to the parking brake cable bracket.
2
Push the RH parking brake rear cable and conduit into the parking brake cable bracket until the parking brake cable and conduit clip is seated.
