Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
Evaporative Canister Filter: Service and Repair
REMOVAL
1. Remove the EVAP canister.
2. Disconnect canister vent solenoid hose assembly.
3. Remove EVAP dust separator.
INSTALLATION
1. To install, reverse the removal procedure.
^
Carry out the leak test. See: Powertrain Management/Emission Control Systems/Evaporative Emissions System/Testing and
Inspection/Component Tests and General Diagnostics/Evaporative Emission System Leak Test
^
Carry out the evaporative emission repair verification drive cycle. See: Powertrain Management/Emission Control Systems/Evaporative
Emissions System/Testing and Inspection/Component Tests and General Diagnostics/Evaporative Emission Repair Verification Drive Cycle