Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
6. Remove the bearing retainer.
7. Remove the bearing and gear.
-
Thoroughly clean all drill shavings from the steering column and inspect it for damage.
8. To install, reverse the removal procedure.
-
Install a new ignition switch lock cylinder.
-
Verify ignition switch lock cylinder operation.
9. WARNING: To avoid the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the
reactivation procedure.
Reactivate the Supplemental Restraint System (SRS).