Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
3. Connect the six solenoid electrical connectors.
1. Connect shift solenoid SSA, SSB, SSC, CCS electrical connectors.
2. Connect the torque converter clutch (TCC) solenoid electrical connector.
3. Connect the electrical pressure control (EBC) solenoid electrical connector.
4. CAUTION: Excessive pressure can break the retaining pins.
Install the main control valve body wire loom.
^
Align the retaining pins to the holes in the solenoid clamps and gently press in the main control valve body wire loom guide and protector.
5. Install the transmission fluid filter.
1. Install the transmission fluid filter.
2. Install the transmission fluid filter screw.
6. Install the transmission fluid pan.
1. Position a new transmission fluid pan gasket on the transmission fluid pan.
2. Align and install the transmission fluid pan.