Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
Fluid Line/Hose: Service and Repair
Tubes-2.5L
Removal
1. Raise the vehicle on a hoist.
2. Disconnect the fluid cooler inlet tube and the fluid cooler tube from the radiator.
3. Disconnect the fluid cooler inlet tube and the fluid cooler tube from the transmission.
4. Remove the transmission fluid cooler line clip, the fluid cooler inlet tube and the fluid cooler tube.
Installation
1. Position the fluid cooler inlet tube and the fluid cooler tube. Install the transmission fluid cooler line clip on the engine.