Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
^
No Engine Braking In Manual 1st
^
DTC P0732, P0733 Or P1762
2.
Install kit (3L5Z-7M203-JA) to update the main control valve body assembly, refer to the installation procedures found in the kit.
3.
Reinstall the main control by continuing to follow the installation steps listed in the Workshop Manual, in-vehicle service, main control valve
body.
4.
After completing the procedure, verify the condition has been corrected.
5.
Clear all DTCs.
Parts Block
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 03-11-9, 02-13-8 02-08-2
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
OPERATION
DESCRIPTION
TIME
032210A
Replace Separator Plate
2.8 Hrs.
And Update Main Control
Valve Body (Includes Time
To Remove And Install
Main Control Valve Body
And Diagnosis)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
D100
D8
Disclaimer