ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
A/T - No 2nd, 3rd Gear/No Engine Braking/DTC's Set|Page 5698 > < A/T - No 2nd, 3rd Gear/No Engine Braking/DTC's Set|Page 5696

Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)

Page 3
background image

9. Remove the low/reverse servo.

1. Remove the low/reverse servo cover screws.
2. Remove the low reverse band servo cover and gasket. Discard the low/reverse servo separator plate cover gasket.

10. Remove the low/reverse band servo piston and rod.

11. CAUTION:  Support the main control valve body.

Do not remove the two (gold) screws specified.

12. CAUTION:  Support the main control valve body.

Remove the screws.

13. Remove the main control valve body.

Installation

A/T - No 2nd, 3rd Gear/No Engine Braking/DTC's Set|Page 5698 > < A/T - No 2nd, 3rd Gear/No Engine Braking/DTC's Set|Page 5696