Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
3. Using a screwdriver, force the rear axle drive pinion seal metal flange up and strike it with a hammer.
4. Using gripping pliers and a hammer, remove the rear axle drive pinion seal.
5. Remove the rear axle drive pinion shaft oil slinger.
6. Using the special tool and a soft-faced hammer, drive the pinion assembly out of the outer pinion bearing and remove it through the rear of the
differential housing.
7. Remove the outer pinion bearing.
8. Remove the drive pinion collapsible spacer and discard it.