Ranger 4WD L4-153 2.5L SOHC VIN C SFI (2001)
10. Position the windshield glass, aligning the marks made previously.
CAUTION: Open a window to prevent the windshield glass from being pushed out by air pressure if a door is closed.
11. Remove any excess urethane adhesive from the outside surface of the windshield glass.
12. Check the installation for air and water leaks through the urethane bond and add urethane adhesive where needed.
13. Install the windshield side garnish mouldings.
14. Install the inside rear view mirror.
15. Install the sun visor clips.
1
Install the clips.
2
Install the screws.