Ranger 4WD Cruise Control Servo Cable: Service and Repair
Cruise Control Servo Cable: Service and Repair
REMOVAL
1. Remove the bolts and the accelerator control splash shield.
2. Disconnect the speed control cable.
1
Disconnect the cable from the throttle lever.
2
Depress the tabs and separate the speed control cable from the intake manifold.
3. Remove the speed control cable cap from the speed control servo.
^
Push in the locking arm on the speed control cable cap then rotate the cap counterclockwise.
4. Remove the speed control cable.
1
Depress the spring retainer.