Ranger 4WD L4-2.3L VIN D (2002)
Front Crankshaft Seal: Service and Repair
Crankshaft Front Oil Seal
Special Tool(s)
Removal
1. Remove the crankshaft pulley.
2. CAUTION: Use care not to damage the engine front cover or the crankshaft when removing the seal.
Remove the crankshaft front oil seal by prying the seal out of the front cover.
Installation
1. NOTE: Lubricate the oil seal with clean engine oil.
Using the special tool, install the crankshaft front oil seal.
2. Install the crankshaft pulley.