Ranger 4WD L4-2.3L VIN D (2002)
Evaporator Core: Service and Repair
REMOVAL
NOTE:
-
The evaporator core is not separately serviceable, it is serviced only with the evaporator core housing assembly.
-
Replacement of the suction accumulator is not required when repairing the refrigerant system except when there is physical evidence of system
contamination from a failed A/C compressor or damage to the suction accumulator.
-
If an evaporator core leak is suspected, the evaporator core must be leak tested before it is removed from the vehicle.
1. Remove the evaporator core housing.
2. Transfer the components from the old evaporator core housing to the new evaporator core housing.
INSTALLATION
1. Install the evaporator core housing.