Ranger 4WD L4-2.3L VIN D (2002)
6. Remove the screws and tilt the radiator back.
7. Remove the screws and the condenser core.
NOTE: It may be necessary to remove the radiator from the mounting saddles to provide clearance for the condenser core removal.
8. Detach the compressor to condenser discharge line from the retaining clip.
9. Detach the compressor to condenser discharge line from the retaining clip and remove the compressor to condenser discharge line.
INSTALLATION
1. To install, reverse the removal procedure.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil or equivalent.
-
Install new O-ring seals lubricated in clean PAG oil or equivalent.
2. Evacuate, leak test, and charge the refrigerant system.