Ranger 4WD L4-2.3L VIN D (2002)
![background image](/ford/ranger_4wd/l4-2.3l_vin_d/Page-3023001.png)
Turn Signal Lamp: Service and Repair
REMOVAL
1. When installing a new bulb you must remove the headlamp assembly. Refer to Headlamp Assembly.
2. Remove the bolts and the side turn signal lamp assembly.
3. Rotate the side turn signal lamp bulb socket one-eighth of a turn, and pull the bulb socket from the side turn signal lamp assembly.
INSTALLATION
1. To install reverse the removal procedure.