Ranger 4WD L4-2.3L VIN D (2002)
6. Remove the CKP.
7. Install an M6 bolt.
INSTALLATION
1. Install the CKP, but do not tighten the bolts at this time.
2. Adjust the CKP with the Crankshaft Position Sensor Alignment Jig and tighten the bolts.
6. Remove the CKP.
7. Install an M6 bolt.
INSTALLATION
1. Install the CKP, but do not tighten the bolts at this time.
2. Adjust the CKP with the Crankshaft Position Sensor Alignment Jig and tighten the bolts.