Ranger 4WD L4-2.3L VIN D (2002)
![background image](/ford/ranger_4wd/l4-2.3l_vin_d/Page-2443007.png)
5. Remove the restraint system diagnostic tool from the vehicle harness side of the clockspring electrical connector at the base of the steering column.
6. Install the clockspring electrical connectors.
1
Install the bolt.
2
Connect the electrical connector. Install the pin-type retainer and electrical connector to the bracket.
3
Connect the electrical connector. Install the pin-type retainer and electrical connector to the bracket.
7. Route the clockspring wire harness into the retainer.
8. Install the key-in-ignition warning indicator switch.