Ranger 4WD L4-2.3L VIN D (2002)
Seat Belt: Service and Repair
Removal and Installation
Retractor - Front, Driver Side and Outside Passenger
Safety Belt Bolt Bit
SPECIAL TOOL(S)
REMOVAL
1. Remove the quarter trim panel.
2. Remove the front safety belt retractor and tongue.
1
Use Safety Belt Bolt Bit to remove the bolt.
2
Remove the front safety belt retractor and tongue.
INSTALLATION
1. To install, reverse the removal procedure.
^
Check the restraint system for correct operation.
Retractor - Front Seat, Four-Door, Supercab
