Ranger 4WD L4-2.3L VIN D (2002)
Connect the front suspension lower arm to the front wheel knuckle.
1. Position the lower ball joint into the front wheel knuckle.
2. Install the castellated nut.
3. Install a new cotter pin.
9. Install the tie-rod end castellated nut.
1. Position the tie-rod end.
2. Install the castellated nut.
3. Install a new cotter pin.
10. Install the torsion bar.
11. Install the wheel hub.
12. Lower the vehicle.
13. Check the ride height.
14. Check the wheel alignment.