Ranger 4WD L4-2.3L VIN D (2002)
15.
Hold the band adjusting screw stationary and tighten the band locknut to 47-61 N.m (35-44 lb-ft).
16.
Following the procedures in the Workshop Manual "In-Vehicle Repair", "Main Control Valve Body", Section 307-01, Install the Main Control
assembly.
17.
Reinstall the catalytic converter.
Parts Block
OTHER APPLICABLE ARTICLES: 02-8-2
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
DEALER CODING
CONDITION
BASIC PART NO.
CODE
7L173
01
OASIS CODES: 504000, 510000