Ranger 4WD L4-2.3L VIN D (2002)
6. Remove the manual control outer lever nut and manual control outer lever.
7. Loosen the screws on the digital TR sensor.
8. Remove the transmission fluid pan.
1. Remove the transmission fluid pan.
2. Remove and discard the transmission fluid pan gasket.
9. Remove the transmission fluid filter.
1. Remove the transmission fluid filter screw.
2. Remove the transmission fluid filter.
10. Remove wire loom guide and protector.
-
Carefully lift up on wire loom guide and protector and disengage the retaining pins from the solenoid clamps.